spaleed_bb.c File Reference

#include <linux/kernel.h>
#include <math.h>
#include "include/dsp-pci32/spa/spacmd.h"

Go to the source code of this file.

Classes

struct BB_GATEGEN

struct SCANP

struct SPALEED

Defines

#define BB_TEST_CNT

#define BB_POLLING_MODE

#define BB_MEM_BASE   0xd0000

#define BB_MEM_AUTOPROBE   0

#define BB_MEM_BASE_START   0xc0000

#define BB_MEM_BASE_END   0xe0000

#define BB_MEM_SIZE   0x400

#define BB_IRQLINE   5

#define BB_XY_DEFLECTON_BOARD   3

#define BB_ENERGY_BOARD   1

#define BB_PCI20001C1   (0x1+0x2+0x8+0x10)

#define BB_PCI20001C2   (0x1+0x4+0x8+0x10)

#define BB_IDMSK   0x1f

#define BB_PCI20006M2   0xe2

#define BB_PCI20006M3   0xe3

#define BB_PCI20007M   0xea

#define BB_BASE_MODULE(N)   ( spa[BB_CARD_NO].BB_membase + (((N)&3)<<8) )

#define BB_MODULE_PRESENT(M)   (readb( BB_BASE_MODULE(0) ) & (1<<(8-(M))))

#define BB_IRQ_STATUS   readb( BB_BASE_MODULE(0) + 0x40 )

#define BB_DAC_X(X, N)   writew( (X), BB_BASE_MODULE(N) + 0x0d)

#define BB_DAC_Y(X, N)   writew( (X), BB_BASE_MODULE(N) + 0x15)

#define BB_DAC_OUT(N)   writeb(0xff, BB_BASE_MODULE(N) + 0x1b)

#define BB_TMR_MODULE_ID   2

#define BB_TMR_BASE   ( BB_BASE_MODULE(BB_TMR_MODULE_ID) )

#define BB_TMR_RTGREG   ( BB_TMR_BASE + 0x04 )

#define BB_TMR_RTGREG_LO   ( BB_TMR_RTGREG )

#define BB_TMR_RTGREG_HI   ( BB_TMR_RTGREG + 1)

#define BB_TMR_CNT0REG   ( BB_TMR_BASE + 0x08 )

#define BB_TMR_CNT1REG   ( BB_TMR_BASE + 0x09 )

#define BB_TMR_CNT2REG   ( BB_TMR_BASE + 0x0A )

#define BB_TMR_CNT3REG   ( BB_TMR_BASE + 0x06 )

#define BB_TMR_RTGCNT3CTRL   ( BB_TMR_BASE + 0x07 )

#define BB_TMR_CNT012CTRL   ( BB_TMR_BASE + 0x0B )

#define BB_TMR_CNTGATECTRL   ( BB_TMR_BASE + 0x0C )

#define BB_CRTL_MSK   0x40

#define AD_MAX_VOLT   10.

#define DA_MAX_VOLT   10.

#define DA_MAX_VAL   0x7ffe

#define UDA_MAX_VAL   0xffff

#define U2FLT(X)   ((X)*(float)(DA_MAX_VAL)/AD_MAX_VOLT)

#define U2INT(X)   (int)((X)*(float)(DA_MAX_VAL)/AD_MAX_VOLT)

#define INT2U(X)   ((float)(X)/DA_MAX_VAL*AD_MAX_VOLT)

#define UNI_U2FLT(X)   ((X)*(float)(UDA_MAX_VAL)/AD_MAX_VOLT)

#define UNI_U2INT(X)   (int)((X)*(float)(UDA_MAX_VAL)/AD_MAX_VOLT)

#define UNI_INT2U(X)   ((float)(X)/UDA_MAX_VAL*AD_MAX_VOLT)

#define DPRAMBASE   (volatile int*) (spa[BB_CARD_NO].dsp->virtual_dpram)

#define CMD_BUFFER   (volatile int*) (DPRAMBASE+0x00)

#define CMD_PARM   (volatile int*) (DPRAMBASE+0x01)

#define BUFFER   (volatile int*) (DPRAMBASE+DSP_BUFFER_START)

#define BUFFERL   (volatile unsigned long*) (DPRAMBASE+DSP_BUFFER_START)

#define DPRAML   (volatile unsigned long*) (DPRAMBASE)

#define LCDBUFFER   (volatile unsigned long*) (DPRAMBASE+DSP_LCDBUFFER)

#define MAXSCANPOINTS   (DSP_DATA_REG_LEN)

#define DSPack   spa[BB_CARD_NO].dsp->SrvReqAck=TRUE

#define MD_CMD   0x08

#define MD_SCAN   0x10

#define MD_BLK   0x80

#define LEDPORT(X)   *((unsigned long*)(DPRAMBASE+DSP_USR_DIO))=X

#define MAX_BB_CARDS   1

#define BB_CARD_NO   0

#define MAKE_MY_TIMEOUT_TMR(tmr)

Functions

void LCDclear (void)

int LCDprintf (const char *format,...)

void scan2d (void)

void linescan (int n, float y)

unsigned long ChanneltronCounts (float x, float y)

int GetParamI (unsigned int N)

float GetParamF (unsigned int N)

void BB_SetVolt (double x, double y)

void BB_SetEnergy (double En)

unsigned long BB_CntRead (void)

double BB_InitCnt (double gate)

void BB_SetCnt (void)

int BB_ReadyCnt (void)

static void bb_gate_interrupt (int irq, void *dev_id, struct pt_regs *regs)

void bb_test_counting (double E, double ms)

int InitEmu (struct dspsim_thread_data *dsp)

void ExitEmu (void)

void ServiceRequest (struct dspsim_thread_data *dsp)

Variables

static int irq_count = 0

static int timeout_count = 0

static SPALEED spa [MAX_BB_CARDS]

Define Documentation

#define AD_MAX_VOLT 10.

Definition at line 108 of file spaleed_bb.c.

#define BB_BASE_MODULE ( N ) ( spa[BB_CARD_NO].BB_membase + (((N)&3)<<8) )

Definition at line 61 of file spaleed_bb.c.

#define BB_CARD_NO 0

Definition at line 164 of file spaleed_bb.c.

#define BB_CRTL_MSK 0x40

Definition at line 91 of file spaleed_bb.c.

#define BB_DAC_OUT ( N ) writeb(0xff, BB_BASE_MODULE(N) + 0x1b)

Definition at line 72 of file spaleed_bb.c.

#define BB_DAC_X ( X,
N ) writew( (X), BB_BASE_MODULE(N) + 0x0d)

Definition at line 70 of file spaleed_bb.c.

#define BB_DAC_Y ( X,
N ) writew( (X), BB_BASE_MODULE(N) + 0x15)

Definition at line 71 of file spaleed_bb.c.

#define BB_ENERGY_BOARD 1

Definition at line 49 of file spaleed_bb.c.

#define BB_IDMSK 0x1f

Definition at line 55 of file spaleed_bb.c.

#define BB_IRQ_STATUS readb( BB_BASE_MODULE(0) + 0x40 )

Definition at line 64 of file spaleed_bb.c.

#define BB_IRQLINE 5

Definition at line 46 of file spaleed_bb.c.

#define BB_MEM_AUTOPROBE 0

Definition at line 42 of file spaleed_bb.c.

#define BB_MEM_BASE 0xd0000

Definition at line 40 of file spaleed_bb.c.

#define BB_MEM_BASE_END 0xe0000

Definition at line 44 of file spaleed_bb.c.

#define BB_MEM_BASE_START 0xc0000

Definition at line 43 of file spaleed_bb.c.

#define BB_MEM_SIZE 0x400

Definition at line 45 of file spaleed_bb.c.

#define BB_MODULE_PRESENT ( M ) (readb( BB_BASE_MODULE(0) ) & (1<<(8-(M))))

Definition at line 63 of file spaleed_bb.c.

#define BB_PCI20001C1 (0x1+0x2+0x8+0x10)

Definition at line 53 of file spaleed_bb.c.

#define BB_PCI20001C2 (0x1+0x4+0x8+0x10)

Definition at line 54 of file spaleed_bb.c.

#define BB_PCI20006M2 0xe2

Definition at line 57 of file spaleed_bb.c.

#define BB_PCI20006M3 0xe3

Definition at line 58 of file spaleed_bb.c.

#define BB_PCI20007M 0xea

Definition at line 59 of file spaleed_bb.c.

#define BB_POLLING_MODE

Definition at line 36 of file spaleed_bb.c.

#define BB_TEST_CNT

Definition at line 35 of file spaleed_bb.c.

#define BB_TMR_BASE ( BB_BASE_MODULE(BB_TMR_MODULE_ID) )

Definition at line 77 of file spaleed_bb.c.

#define BB_TMR_CNT012CTRL ( BB_TMR_BASE + 0x0B )

Definition at line 88 of file spaleed_bb.c.

#define BB_TMR_CNT0REG ( BB_TMR_BASE + 0x08 )

Definition at line 82 of file spaleed_bb.c.

#define BB_TMR_CNT1REG ( BB_TMR_BASE + 0x09 )

Definition at line 83 of file spaleed_bb.c.

#define BB_TMR_CNT2REG ( BB_TMR_BASE + 0x0A )

Definition at line 84 of file spaleed_bb.c.

#define BB_TMR_CNT3REG ( BB_TMR_BASE + 0x06 )

Definition at line 85 of file spaleed_bb.c.

#define BB_TMR_CNTGATECTRL ( BB_TMR_BASE + 0x0C )

Definition at line 89 of file spaleed_bb.c.

#define BB_TMR_MODULE_ID 2

Definition at line 75 of file spaleed_bb.c.

#define BB_TMR_RTGCNT3CTRL ( BB_TMR_BASE + 0x07 )

Definition at line 87 of file spaleed_bb.c.

#define BB_TMR_RTGREG ( BB_TMR_BASE + 0x04 )

Definition at line 78 of file spaleed_bb.c.

#define BB_TMR_RTGREG_HI ( BB_TMR_RTGREG + 1)

Definition at line 80 of file spaleed_bb.c.

#define BB_TMR_RTGREG_LO ( BB_TMR_RTGREG )

Definition at line 79 of file spaleed_bb.c.

#define BB_XY_DEFLECTON_BOARD 3

Definition at line 48 of file spaleed_bb.c.

#define BUFFER (volatile int*) (DPRAMBASE+DSP_BUFFER_START)

Definition at line 129 of file spaleed_bb.c.

#define BUFFERL (volatile unsigned long*) (DPRAMBASE+DSP_BUFFER_START)

Definition at line 130 of file spaleed_bb.c.

#define CMD_BUFFER (volatile int*) (DPRAMBASE+0x00)

Definition at line 127 of file spaleed_bb.c.

#define CMD_PARM (volatile int*) (DPRAMBASE+0x01)

Definition at line 128 of file spaleed_bb.c.

#define DA_MAX_VAL 0x7ffe

Definition at line 110 of file spaleed_bb.c.

#define DA_MAX_VOLT 10.

Definition at line 109 of file spaleed_bb.c.

#define DPRAMBASE (volatile int*) (spa[BB_CARD_NO].dsp->virtual_dpram)

Definition at line 125 of file spaleed_bb.c.

#define DPRAML (volatile unsigned long*) (DPRAMBASE)

Definition at line 131 of file spaleed_bb.c.

#define DSPack spa[BB_CARD_NO].dsp->SrvReqAck=TRUE

Definition at line 135 of file spaleed_bb.c.

#define INT2U ( X ) ((float)(X)/DA_MAX_VAL*AD_MAX_VOLT)

Definition at line 117 of file spaleed_bb.c.

#define LCDBUFFER (volatile unsigned long*) (DPRAMBASE+DSP_LCDBUFFER)

Definition at line 132 of file spaleed_bb.c.

#define LEDPORT ( X ) *((unsigned long*)(DPRAMBASE+DSP_USR_DIO))=X

Definition at line 141 of file spaleed_bb.c.

#define MAKE_MY_TIMEOUT_TMR ( tmr )

Value:
struct timer_list tmr; \ init_timer(&tmr); \ tmr.function = timeout; \ tmr.data = 0

Definition at line 513 of file spaleed_bb.c.

#define MAX_BB_CARDS 1

Definition at line 163 of file spaleed_bb.c.

#define MAXSCANPOINTS (DSP_DATA_REG_LEN)

Definition at line 133 of file spaleed_bb.c.

#define MD_BLK 0x80

Definition at line 139 of file spaleed_bb.c.

#define MD_CMD 0x08

Definition at line 137 of file spaleed_bb.c.

#define MD_SCAN 0x10

Definition at line 138 of file spaleed_bb.c.

#define U2FLT ( X ) ((X)*(float)(DA_MAX_VAL)/AD_MAX_VOLT)

Definition at line 115 of file spaleed_bb.c.

#define U2INT ( X ) (int)((X)*(float)(DA_MAX_VAL)/AD_MAX_VOLT)

Definition at line 116 of file spaleed_bb.c.

#define UDA_MAX_VAL 0xffff

Definition at line 111 of file spaleed_bb.c.

#define UNI_INT2U ( X ) ((float)(X)/UDA_MAX_VAL*AD_MAX_VOLT)

Definition at line 122 of file spaleed_bb.c.

#define UNI_U2FLT ( X ) ((X)*(float)(UDA_MAX_VAL)/AD_MAX_VOLT)

Definition at line 120 of file spaleed_bb.c.

#define UNI_U2INT ( X ) (int)((X)*(float)(UDA_MAX_VAL)/AD_MAX_VOLT)

Definition at line 121 of file spaleed_bb.c.

Function Documentation

unsigned long BB_CntRead ( void )

static void bb_gate_interrupt ( int irq,

void * dev_id,

struct pt_regs * regs

) [static]

Definition at line 695 of file spaleed_bb.c.
References irq_count, spa, and SPALEED::waitq.

double BB_InitCnt ( double gate )

int BB_ReadyCnt ( void )

void BB_SetCnt ( void )

void BB_SetEnergy ( double En )

void BB_SetVolt ( double x,

double y

)

void bb_test_counting ( double E,

double ms

)

Definition at line 214 of file spaleed_bb.c.
References BB_CARD_NO, BB_InitCnt(), BB_SetEnergy(), ChanneltronCounts(), irq_count, KDEBUG, SCANP::ms, SPALEED::scanp, spa, and timeout_count.

unsigned long ChanneltronCounts ( float x,

float y

)

void ExitEmu ( void )

Definition at line 340 of file spaleed_bb.c.
References BB_IRQLINE, irq_count, KDEBUG, and timeout_count.

float GetParamF ( unsigned int N )

int GetParamI ( unsigned int N )

int InitEmu ( struct dspsim_thread_data * dsp )

Definition at line 227 of file spaleed_bb.c.
References BB_BASE_MODULE, BB_CARD_NO, BB_IDMSK, BB_MEM_AUTOPROBE, BB_MEM_BASE, BB_MEM_BASE_END, BB_MEM_BASE_START, BB_MEM_SIZE, SPALEED::BB_membase, BB_PCI20001C1, BB_PCI20001C2, SPALEED::dsp, KDEBUG, SPALEED::major, SPALEED::minor, PCDSP_MAJOR, and spa.

void LCDclear ( void )

int LCDprintf ( const char * format,

...

)

void linescan ( int n,

float y

)

void scan2d ( void )

void ServiceRequest ( struct dspsim_thread_data * dsp )

Definition at line 374 of file spaleed_bb.c.
References SCANP::alpha, BB_CARD_NO, BB_InitCnt(), BB_SetEnergy(), BB_SetVolt(), BUFFERL, SPALEED::chanhv, ChanneltronCounts(), SPALEED::chanrepeller, CMD_BUFFER, SPALEED::cryfocus, DSP_alpha, DSP_CMD_GETCNT, DSP_CMD_SCAN2D, DSP_CMD_SCAN_PARAM, DSP_CMD_SCAN_START, DSP_CMD_SPACTRL_SET, DSP_CMD_SWAPDPRAM, DSP_E, DSP_len, DSP_LXY, DSP_ms, DSP_MXX, DSP_MXY, DSP_MYX, DSP_MYY, DSP_N, DSP_NX, DSP_NY, DSP_SPACTRL_CHANHV, DSP_SPACTRL_CHANREPELLER, DSP_SPACTRL_CRYFOCUS, DSP_SPACTRL_EXTRACTOR, DSP_SPACTRL_FILAMENT, DSP_SPACTRL_GROWING, DSP_SPACTRL_GUNANODE, DSP_SPACTRL_GUNFOCUS, DSP_SPACTRL_SMPDIST, DSP_SPACTRL_SMPTEMP, DSP_X0, DSP_Y0, DSPack, SCANP::E, SPALEED::extractor, FALSE, SPALEED::filament, GetParamF(), GetParamI(), SPALEED::growing, SPALEED::gunanode, SPALEED::gunfocus, SPALEED::LastSPAMode, SCANP::len, SCANP::lenxy, linescan(), MD_CMD, MD_SCAN, SCANP::ms, SCANP::N, SCANP::Nx, SCANP::Ny, REQD_DSP, SCANP::rotmxx, SCANP::rotmxy, SCANP::rotmyx, SCANP::rotmyy, SCANP::rotoffx, SCANP::rotoffy, scan2d(), scanp, SPALEED::scanp, SPALEED::smpdist, SPALEED::smptemp, spa, SPALEED::SPAMode, SCANP::X0, and SCANP::Y0.

Variable Documentation

int irq_count = 0 [static]

Definition at line 101 of file spaleed_bb.c.

SPALEED spa[MAX_BB_CARDS] [static]

Definition at line 210 of file spaleed_bb.c.

int timeout_count = 0 [static]

Definition at line 102 of file spaleed_bb.c.

Generated on Sat Apr 1 09:04:46 2006 for GXSM by

1.4.6


Classes
struct	BB_GATEGEN
struct	SCANP
struct	SPALEED
Defines
#define	BB_TEST_CNT
#define	BB_POLLING_MODE
#define	BB_MEM_BASE 0xd0000
#define	BB_MEM_AUTOPROBE 0
#define	BB_MEM_BASE_START 0xc0000
#define	BB_MEM_BASE_END 0xe0000
#define	BB_MEM_SIZE 0x400
#define	BB_IRQLINE 5
#define	BB_XY_DEFLECTON_BOARD 3
#define	BB_ENERGY_BOARD 1
#define	BB_PCI20001C1 (0x1+0x2+0x8+0x10)
#define	BB_PCI20001C2 (0x1+0x4+0x8+0x10)
#define	BB_IDMSK 0x1f
#define	BB_PCI20006M2 0xe2
#define	BB_PCI20006M3 0xe3
#define	BB_PCI20007M 0xea
#define	BB_BASE_MODULE(N) ( spa[BB_CARD_NO].BB_membase + (((N)&3)<<8) )
#define	BB_MODULE_PRESENT(M) (readb( BB_BASE_MODULE(0) ) & (1<<(8-(M))))
#define	BB_IRQ_STATUS readb( BB_BASE_MODULE(0) + 0x40 )
#define	BB_DAC_X(X, N) writew( (X), BB_BASE_MODULE(N) + 0x0d)
#define	BB_DAC_Y(X, N) writew( (X), BB_BASE_MODULE(N) + 0x15)
#define	BB_DAC_OUT(N) writeb(0xff, BB_BASE_MODULE(N) + 0x1b)
#define	BB_TMR_MODULE_ID 2
#define	BB_TMR_BASE ( BB_BASE_MODULE(BB_TMR_MODULE_ID) )
#define	BB_TMR_RTGREG ( BB_TMR_BASE + 0x04 )
#define	BB_TMR_RTGREG_LO ( BB_TMR_RTGREG )
#define	BB_TMR_RTGREG_HI ( BB_TMR_RTGREG + 1)
#define	BB_TMR_CNT0REG ( BB_TMR_BASE + 0x08 )
#define	BB_TMR_CNT1REG ( BB_TMR_BASE + 0x09 )
#define	BB_TMR_CNT2REG ( BB_TMR_BASE + 0x0A )
#define	BB_TMR_CNT3REG ( BB_TMR_BASE + 0x06 )
#define	BB_TMR_RTGCNT3CTRL ( BB_TMR_BASE + 0x07 )
#define	BB_TMR_CNT012CTRL ( BB_TMR_BASE + 0x0B )
#define	BB_TMR_CNTGATECTRL ( BB_TMR_BASE + 0x0C )
#define	BB_CRTL_MSK 0x40
#define	AD_MAX_VOLT 10.
#define	DA_MAX_VOLT 10.
#define	DA_MAX_VAL 0x7ffe
#define	UDA_MAX_VAL 0xffff
#define	U2FLT(X) ((X)*(float)(DA_MAX_VAL)/AD_MAX_VOLT)
#define	U2INT(X) (int)((X)*(float)(DA_MAX_VAL)/AD_MAX_VOLT)
#define	INT2U(X) ((float)(X)/DA_MAX_VAL*AD_MAX_VOLT)
#define	UNI_U2FLT(X) ((X)*(float)(UDA_MAX_VAL)/AD_MAX_VOLT)
#define	UNI_U2INT(X) (int)((X)*(float)(UDA_MAX_VAL)/AD_MAX_VOLT)
#define	UNI_INT2U(X) ((float)(X)/UDA_MAX_VAL*AD_MAX_VOLT)
#define	DPRAMBASE (volatile int*) (spa[BB_CARD_NO].dsp->virtual_dpram)
#define	CMD_BUFFER (volatile int*) (DPRAMBASE+0x00)
#define	CMD_PARM (volatile int*) (DPRAMBASE+0x01)
#define	BUFFER (volatile int*) (DPRAMBASE+DSP_BUFFER_START)
#define	BUFFERL (volatile unsigned long*) (DPRAMBASE+DSP_BUFFER_START)
#define	DPRAML (volatile unsigned long*) (DPRAMBASE)
#define	LCDBUFFER (volatile unsigned long*) (DPRAMBASE+DSP_LCDBUFFER)
#define	MAXSCANPOINTS (DSP_DATA_REG_LEN)
#define	DSPack spa[BB_CARD_NO].dsp->SrvReqAck=TRUE
#define	MD_CMD 0x08
#define	MD_SCAN 0x10
#define	MD_BLK 0x80
#define	LEDPORT(X) ((unsigned long)(DPRAMBASE+DSP_USR_DIO))=X
#define	MAX_BB_CARDS 1
#define	BB_CARD_NO 0
#define	MAKE_MY_TIMEOUT_TMR(tmr)
Functions
void	LCDclear (void)
int	LCDprintf (const char *format,...)
void	scan2d (void)
void	linescan (int n, float y)
unsigned long	ChanneltronCounts (float x, float y)
int	GetParamI (unsigned int N)
float	GetParamF (unsigned int N)
void	BB_SetVolt (double x, double y)
void	BB_SetEnergy (double En)
unsigned long	BB_CntRead (void)
double	BB_InitCnt (double gate)
void	BB_SetCnt (void)
int	BB_ReadyCnt (void)
static void	bb_gate_interrupt (int irq, void dev_id, struct pt_regs regs)
void	bb_test_counting (double E, double ms)
int	InitEmu (struct dspsim_thread_data *dsp)
void	ExitEmu (void)
void	ServiceRequest (struct dspsim_thread_data *dsp)
Variables
static int	irq_count = 0
static int	timeout_count = 0
static SPALEED	spa [MAX_BB_CARDS]